Out of stock. Pre-order your veneer now. Estimated shipping date between the 3rd – 8th of August.
Warning: Last items in stock!
The more you buy, the less the cost per set. You choose exactly how many boards you want to make.
Our maple is grown in the far north of Canada, where the very long and very cold winters mean the tress grow very slowly. Tight growth rings mean denser wood veneer. Canadian-grown maple is always the best choice for making strong skateboards. A SFI-certified mill rotary cuts logs for us, and sorts to our exacting specifications.
Each set of veneer includes 2 cross-grain and 2 face sheets , 3 core.
How to use this product:
Design and build your own custom longboard using this premium 1/16 thick veneer. This veneer is best used in a Thin Air Press vacuum bag, which applies pressure evenly over the entire board. It eliminates the problem of voids and missed spots, a common problem with some other types of presses.
Using many layers of 1/16 veneer will allow you to create fairly radical curves, which will add strength to your board.
When laying up your board, follow the rule that your cross grain sheets should always be layered closest to the middle of your stack, with one layer of core in between the 2 cross grains. We do not recommend any more than 2 cross grain sheets per board.
Best Vacuum Bag size: 20 x 70 Thin Air Press TPK20
No customer reviews for the moment.
|2 Cross band, 5 CORE sheets and 2 Face||Included per set|
|Width||24 cm (9.5'')|
|Length||86.5 cm (34'')|
|Thickness||1/16'' (1.58 mm)|
|Thickness of crossband sheets||choice of 1/20'' (1.27 mm) or 1/24'' (1.06 mm)|