If you have a colour preference, please indicate this when ordering, under 'Product Customisation' otherwise they will be picked at random.
The colour is infused right through this veneer so that when you sand it, the color does not disappear.
Please be aware that as the grain density in the veneer accepts the dye differently, there can be dramatic variance in the color when sanded.
NOTE: These sheets are not sold separately - order minimum of 14 sheets or order along with another Longboard maple veneer pack. We cannot ship these sheets on their own as they will easily bend and crack in shipping.
How to use this product:
Dye-infused color sheets can be used for top, bottom and internal sheets of a skateboard or other laminated project.
Glue up as you would your other veneer sheets.
A color sheet on the graphics side of a board makes a great base for your design.
A color sheet (or a few) as inside layers of a board make for an interesting side detail, especially when wheel-wells are sanded into the layers.
Any loose dye may rub off on your hands and clothing, some colors more than others, so protect your self, clothes and your work surface when using these sheets.
Veneer expands and contracts with moisture. Our veneer is shipped with +/- 7% humidity. Keep your veneer stored away from heat sources, and lay it flat.
If your work area is very dry, keep your unused veneer sealed in plastic (a garbage will do) until you are ready to use it.
Until it is laminated together, veneer sheets are prone to splits, especially the cross grain sheets. Handle them with care, but if any sheets do split, they can be repaired with a bead of glue and masking tape.
* required fields
No customer reviews for the moment.
|Width||24 cm (9.5'')|
|Length||86.5 cm (34'')|
|Thickness||1/16'' (1.58 mm)|
|Colours||Available colours change often - Please check before ordering or send us an email|
|Note||Colour shades can change from one sheet to the next|